3 www.PyleUSA.com www.PyleUSA.com 9
MAIN CHANNEL TONEAND BALANCE
Press the 'MENU' on the control panel of the receiver system. Adjust the display TRExx*
BASSxx
1
and VOLUME/MULFI' is volume/Multi-function knob.
This knob can adjust main channel bass/Treble volume level and Left/Right channel
volume balance.
USB OPERATION
Press the 'Input
1
button on the remote control or on the control panel of the receiver system.
Select 'USB'mode.Then insert USB flash disk.This unit can automatically play the USB
flash disk file. Then press * button to operate the corresponding function. Supports
WMA/MP3/APE/PLAC files
Note:
1. Because video files continuously updates, this product can't play all format files.
2. If USB flash disk doesn't work on USB mode. The operation is invalid
MIC
・ Insert MIC. The display will show 'OK IN'
-Press the 'OK MENU
1
on the control panel of the receiver system. Rotate 'VOLUME
/MULTI* knob. Adjust MIC volume. Press the 'MIC VOL+/-“MIC ECHO+/-WIC DELAY
+/-" on the remote control. Adjust the microphone Master/echo/delay volume level.
HIFI
・ In ANALOG INPUT mode, press the 'HIFI' button on the remote control.
Output is 2.0ch stereo audio mode.
HDMI
1. Connect audio equipment (Blu-ray DVD player, Set Top Box) with HDMI output by
using HDMI cable.
2. Press the 'Digital input
1
on the remote control or on the control panel of the receiver
system. Select the appropriate channel.
3. Press the TH. MODE' on the remote control to change the channel of the broadcast
program.
4. HDMI with ARC function. Set the TV audio in 'External speaker' or 'Audio
system
1
, press 'ARC ON' on remote control,. The display will show 'ARC on
1
, This
amplifier can play the TV audio. Press 'ARC off； The amplifier goes back to default
channel.
Note: HDMI Version 1.4B. Support 3D4K
Make sure the TV has ARC function and set the TV in ARC ON state.
Wireless BT Function
1. The receiver connects to your Bluetooth-enabled device, allowing the system to receive
your wireless bluetooth signal and stream audio to any connected speaker system.
2. Press the 'ANALOG INPUT' on the remote control or on the control panel of the
receiver system, then enter to 'BT' mode-as indicated on the display screen.
3. Ensure Bluetooth is activated on your device and search for bluetooth Network Named:
PYLEUSA
4. No password is required for connecting.
ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT696BT to play audio
from any TV with a single HDMI cable. It can be adjusted either on the front control panel
or via the included remote control.
Enable your TV to send audio signal upstream to a connected speaker system or AV
receiver while eliminating additional cable connections and clutter from an optical audio
cable (S/PDIF). ARC audio transmission links your speaker output to your television
controls, meaning you do not need an external/additional remote or interface to configure
audio levels. Enjoy an optimal multimedia home theater experience by connecting your
television and Hi-Fi equipment into one, seamless entertainment system.
FM RADIO
Press 'AUTO " TUNE+/-
1
' CH+/-' button on the remote control. Operate automatic search
and save station, manually save and select the stored station function.
DSP Sound Field Control
Press 'DSP* or *CH MODE
1
on the remote control. 7 different sound field effects can be
selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)
NOTE: Pressing those button on the digital input channel is invalid
LOUD
Press 'LOUD ON'on the remote contnol.The low frequency of this unit can be increased
appropriately at low volume. Then press 'LOUND OFF* to cancel this function.
DISPLAY
Press 'DISPLAY' button on the remote conlrol to adjust different display mode.
RESET
Press 'RESET' button on the remote control to restore to the factory setting state.
To Next Page
Loading...
Need help?
General
