ww w.PyleUSA.com
13
INSTALLATION CONSIDERATIONS
DO:
• Place the amplier with the feet resting on a solid at level surface.
• Place the amplier in a well-vented area to provide proper cooling. In areas that
lack proper ventilation, such as tight cabinets or racks, it may be necessary to
install small fans to create air movement.
DON’T:
• Don’t block the ventilation holes on the top or bottom of the amplier.
Never place it on carpeting or similar material.
• Don’t place the amplier in any other position other than horizontal with the feet
down. Never place on its side or resting on the back where the terminals are
located.
• Don’t the amplier near heat sources, or in an area that it would be exposed to
moisture.
YOU SHOULD KNOW
• The power supply is very large and therefore may cause a hum to be heard in
some components if they are placed very close to the amplier.