Pylontech Force-H2 User Manual

4. SYSTEM DEBUG
.....................................................................................................................................................
25
5. MAINTENANCE
.....................................................................................................................................................
26
5.1 Trouble Shooting:
................................................................................................................................
26
5.2 Replacement of main component
...............................................................................................
28
5.2.1 Replacement of Battery Module
................................................................................................
28
5.2.2 Replacement of Control Module (BMS)
...................................................................................
30
5.3 Battery Maintenance
........................................................................................................................
30
6. STORAGE RECOMMENDATIONS
.......................................................................................................................
32
7. SHIPMENT
...............................................................................................................................................................
32
ANNEX 1: INSTALLATION AND SYSTEM TURN ON PROGRESS LIST
.................................................................
33
ANNEX 2: SYSTEM TURN OFF PROGRESS LIST
.....................................................................................................
34

Pylontech Force-H2 Specifications

General

Nominal Capacity	3.55 kWh
Battery Type	Lithium Iron Phosphate (LiFePO4)
Communication	CAN, RS485
Certification	CE, UN38.3, IEC62619
Warranty	10 years
Operating Temperature Range	-10°C to 50°C
Storage Temperature Range	-20°C to 60°C
IP Rating	IP20
Cycle Life	>6000 cycles