Cleaning
Clean the exterior surfaces of the camera with a dry, lint-free cloth. To remove stains, contact QImaging
Support. To clean the camera’s imaging window, use only a filtered compressed-air source. Handheld cans are
not recommended, as they may spray propellant onto the window. Do not touch the window.
Repair
The optiMOS camera system contains no user-serviceable parts. Repairs must be completed by QImaging.
Should your camera system need repair, contact QImaging Support. Please save the original packing materials
so you can safely ship the camera system to another location or return it for repairs if necessary.
IMPORTANT: DO NOT OPEN the camera. Opening the optiMOS camera voids the warranty.
To Next Page
Loading...
Need help?
General