CUSTOMER SUPPORT
24/7 Technical Resources on www.q-see.com
Live Chat on the Homepage (M-F 9-5 PST)
E-mail: ts@dpsi-usa.com
Call Q-See Support Specialists at 877-998-3440 (M-F 9-5 PST)
Questions Or Comments? Contact Us
Before You Get Started
ADDRESS
Q-SeeProducts
DigitalPeripheralSolutions,Inc.
8015E.CrystalDrive
Anaheim,CA92807
FAX
714-998-3509
WEBSITE
http://www.Q-See.com
Make sure you register your product.
Visit www.q-see.com, click SUPPORT,
then online registration form.
Complete the product registration form to receive
warranty/technical support benefits, and to be
notified of product updates and free downloadable
firmware updates to your DVR.
A: Gather your Components.
You will Need:
1: A 19” or larger VGA PC monitor and VGA cable OR television of any size.
2: A surge protector.
We STRONGLY recommend that you use one that has the following specifications:
- UL-1449 rated
- Clamping voltage of 330 or lower
- Joule rating of at least 400
- Response time of 10 nanoseconds or less
3: A power screw driver/drill and bubble level to mount your cameras and included power distribution panel.
Your DVR can be controlled using the included USB mouse, remote control or the function keys on the front
of the unit. For the purposes of this guide, we will be giving instructions using the mouse.
B: Unpack the Box...
Check contents against the “What’s in the Box” list that was packed at the top of your product.
If you notice any damage, please contact Q-See Customer Care at 877-998-3440.
IMPORTANT!
This walkthrough will allow
you to test your
cameras and connections
before you mount them.
To Next Page
Loading...
Need help?
General
