23
2. Ensure that the option for DNS is set to Static DNS.
3. Write down the IP address that is located in the IP Address field.
4. Click the Advanced tab at the top and change the HTTP port to any 4 digit number above 1024.
5. Click the Apply button at the bottom right hand of the page.
6. Write down the HTTP port number you inputted in the HTTP port field.
7. Open up a web browser and type in the IP address you wrote down, and then add a colon mark, and add the
port number to the end. The IP should look something like the following: http://192.168.2.135:1111
8. Install the plugins onto your browser.
9. Once installed, enter in your login credentials and click Log In.
10. Save this page as a bookmark so you can quickly access the interface while on the same network.
For detailed operation information about web access, please refer to the User Manual included in the packaged
CD, or the paper copy of the User Manual included with the system.
To Next Page
Loading...