39
• Email Settings: This button allows the user to modify email settings for the NVR. This will send the user to the
Email Settings menu where email settings can be modified. This is necessary to configure for use in email
alerts.
• FTP Settings: This button allows the user to modify FTP settings for the NVR. This will send the user to the FTP
menu where FTP settings can be modified.
• IP Filter: This button allows the user to modify IP Filter settings for the NVR. This will send the user to the IP
Filter menu where IP Filter settings can be modified.
• Server Port: This button allows the user to set the server port.
• HTTP Port: This button allows the user to set the HTTP port.
• RTSP Port: This button allows the user to set the RTSP port.
• UPNP Enable: This checkbox allows the user to enable the use of UPnP protocol on the device.
• UID: This field shows the user the NVR’s UID and allows the user to send it.
4.6.5.3 Network Status
Below is an explanation of the fields on this screen:
• Net Status: This field shows the user what the status of the network is.
• IP Address: This field shows the user the IP address of the NVR.
• Subnet Mask: This field shows the user the subnet mask of the NVR.
• Default Gateway: This field shows the user the default gateway of the NVR.
• Preferred DNS Server: This field shows the user the NVR’s preferred DNS server address.
• Alternate DNS Server: This field shows the user the NVR’s alternate DNS server address.
4.6.6 Alarm
The alarm menu is where the user can set up motion detection, video loss, or exception alarms.
To Next Page
Loading...