QDI P5I430TX Titanium IB+ - Page 45

Chapter 3
3 -
13
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : Auto
ESC: Quit ↑↓→← : Select Item
Onboard Serial Port 2 : Auto F1 : Help PU/PD/+/- : Modify
UR2 Mode : Standard F5 : Old Values (Shift)F2: Color
Onboard Parallel Port : 378/IRQ7 F7 : Load Setup Defaults
Parallel Port Mode : SPP
Figure 3-7 Integrated Peripherals Menu
The following indicates the options of each item and describe their meaning.
Item Option Description
• IDE HDD Block
Mode
Enabled
Allows IDE HDD to read/write several
sectors once.
Disabled
IDE HDD only reads/writes a sector once.
• IDE
Primary/Secondary
Master/Slave
PIO/UDMA
Mode 0 - 4
Auto
Defines the IDE primary/secondary master/
slave PIO mode.
The IDE PIO mode is defined according to
auto – detect.
• On-chip
Primary/Secondary
PCI IDE
Enabled
Disabled
On-chip primary/secondary PCI IDE port is
enabled.
On-chip primary/secondary PCI IDE port is
disabled.
• Onboard FDC
Controller
Enabled
Disabled
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
• Onboard Serial Port
1/2
3F8/IRQ4,
2F8/IRQ3,
Defines onboard serial port address and
required interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Disabled,
Onboard serial port is disabled.
Auto
Sets address and interrupt number
automatically.
• UR2 Mode
Standard
Sharp IR
IrDA SIR
Defines UR2 mode.
• Onboard Parallel
Port
378/IRQ7,
278/IRQ5,
Defines onboard parallel port address and
IRQ channel.
3BC/IRQ7
Disabled
Onboard parallel port is disabled.
• ECP Mode Use
DMA
1
3
Define channel 1 used for DMA.
• EPP Version
1.7
1.9
Defines EPP version.