QDI P5I430TX Titanium IB+ - Load Setup Defaults; Integrated Peripherals

AWARD BIOS Description
3 -
10
Disabled
Disable forces updating ESCD
function.
• IRQ-3 ∼ IRQ-15
assigned to
Legacy ISA
The specified IRQ-x will be assigned
to ISA only.
PCI/ISA PnP
The specified IRQ-x will be assigned
to ISA or PCI.
• DMA-0 ∼ DMA-7
assigned to
Legacy ISA
The specified DMA-x will be assigned
to ISA only.
PCI/ISA PnP
The specified DMA-x will be assigned
to ISA or PCI.
• PCI IDE IRQ Map
To
PCI-AUTO
BIOS will scan for PCI IDE devices
and determine the location of the PCI
IDE device.
PCI - SLOT 1~4
BIOS will scan IRQ14 for primary IDE
INT# and IRQ15 for secondary IDE
INT# at the specified slot.
ISA
BIOS will not assign any IRQs even if
PCI IDE card is found, because some
IDE cards connect the IRQ14&15
directly from ISA slot through a card.
• Primary IDE INT# A ∼ D
Indicates which INT# the PCI IDE card
uses for its interrupting 1st IDE channel.
• Secondary IDE INT# A ∼ D
Indicates which INT# the PCI IDE card
uses for its interrupting 2nd IDE channel.
• Used MEM Base
Addr/Used MEM Length
C800/8 ∼ 64K
Claims a memory space occupied by
legacy ISA card.
N/A
Invalidates this feature.
3.8 Load Setup Defaults
The Setup Default settings are common and efficient.
3.9 Integrated Peripherals
ROM PCI/ISA BIOS (2A59IQ1G)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Enabled ECP mode use DMA : 1
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto