MULTIPLEX
Atmospheric Oil Mist Detection System
AM8/JANUARY 2015
EMAIL qmi@oilmist.com WEBSITE www.oilmist.com 4 East Barnet Road, London, England, EN4 8RW TEL +44 (0)20 7328 3121
Maintenance Part5-4
IMPORTANT NOTES
1. The Sensor electronics are factory calibrated and cannot be serviced on site. In
the event of a fault the Sensor must be sent back to QMI unless it is a faulty fan,
then just change the fan as shown in Part 5-5.
2. DO NOT USE diesel oil, acetone or kerosene to clean Sensors and Sensor lenses.
3. DO NOT IMMERSE Sensor in any cleaning solution.
To Next Page
Loading...
