QNAP TL-R400S User Manual

1. Preface
About This Guide
This guide provides information on the QNAP TL-R400S and TL-R1200S-RP JBOD enclosures and step-by-
step instructions on installing the hardware. It also provides instructions on basic operations and
troubleshooting information.
Audience
This document is intended for consumers and storage administrators. This guide assumes that the user has
a basic understanding of storage and backup concepts.
Document Conventions
Symbol Description
Notes provide default configuration settings and other supplementary
information.
Important notes provide information on required configuration settings and other
critical information.
Tips provide recommendations or alternative methods of performing tasks or
configuring settings.
Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Preface 3

QNAP TL-R400S Specifications

General

Hot-swap	Yes
Storage drive size	2.5/3.5 \
Total installed storage capacity	0 TB
Number of storage drives supported	8
Supported storage drive interfaces	Serial ATA III
Fan diameter	40 mm
Product type	HDD/SSD enclosure
Product color	Black, Grey
Rack capacity	1U
LED indicators	Fan fail, HDD, Link
Number of fans	2 fan(s)
USB connectivity	No
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Noise level	22.1 dB
Data transfer rate	6 Gbit/s
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Cables included	AC, MiniSAS
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	291.1 mm
Width	438.9 mm
Height	43.9 mm
Weight	3980 g
Package weight	5380 g