EasyManuals Logo

QNAP TL-R400S User Manual

QNAP TL-R400S
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
2. Product Overview
This chapter provides basic information about the QNAP TL-R400S and TL-R1200S-RP JBOD enclosures.
About QNAP JBOD Enclosures
QNAP JBOD enclosures are designed to increase the capacity and utility of your NAS or computer and
provide a wide range of storage applications. Drives installed in JBOD enclosures can be managed
independently or be configured as software RAID by the host device. The TL-R400S and TL-R1200S-RP
feature SFF-8088 SATA 6 Gb/s ports to ensure quick and efficient data transfer between the JBOD
enclosure and the host device.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Component TL-R400S TL-R1200S-RP
Ordering Information
Ordering P/N TL-R400S TL-R1200S-RP
Storage
Drive bays 4 x 3.5-inch SATA 6 Gbps 12 x 3.5-inch SATA 6 Gbps
Drive compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid-state drives
Hot-swapping Supported
External I/O Ports & Expansion Slots
SFF ports 1 x SFF-8088 (drive bays 1-4) 3 x SFF-8088
Port 1: Drive bays 1-4
Port 2: Drive bays 5-8
Port 3: Drive bays 9-12
Important
Each SFF-8088 port supports four SATA 6 Gb/s lanes.
These ports are only for connecting the host bus
adapter to a JBOD enclosure.
Interface
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Product Overview 4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TL-R400S and is the answer not in the manual?

QNAP TL-R400S Specifications

General IconGeneral
Hot-swapYes
Storage drive size2.5/3.5 \
Total installed storage capacity0 TB
Number of storage drives supported8
Supported storage drive interfacesSerial ATA III
Fan diameter40 mm
Product typeHDD/SSD enclosure
Product colorBlack, Grey
Rack capacity1U
LED indicatorsFan fail, HDD, Link
Number of fans2 fan(s)
USB connectivityNo
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Noise level22.1 dB
Data transfer rate6 Gbit/s
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Cables includedAC, MiniSAS
Harmonized System (HS) code84733080
Weight and Dimensions IconWeight and Dimensions
Depth291.1 mm
Width438.9 mm
Height43.9 mm
Weight3980 g
Package weight5380 g

Related product manuals