EasyManua.ls Logo

QNAP TL-R400S - User Manual

QNAP TL-R400S
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
JBOD Enclosure
TL-R400S
TL-R1200S-RP
User Guide
Document Version: 2
20/02/2020

Table of Contents

Questions and Answers

QNAP TL-R400S Specifications

General IconGeneral
Hot-swapYes
Storage drive size2.5/3.5 \
Total installed storage capacity0 TB
Number of storage drives supported8
Supported storage drive interfacesSerial ATA III
Fan diameter40 mm
Product typeHDD/SSD enclosure
Product colorBlack, Grey
Rack capacity1U
LED indicatorsFan fail, HDD, Link
Number of fans2 fan(s)
USB connectivityNo
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Noise level22.1 dB
Data transfer rate6 Gbit/s
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Cables includedAC, MiniSAS
Harmonized System (HS) code84733080
Weight and Dimensions IconWeight and Dimensions
Depth291.1 mm
Width438.9 mm
Height43.9 mm
Weight3980 g
Package weight5380 g

Summary

Product Overview

Hardware Specifications

Installation Requirements

Setting Up the JBOD Enclosure

Hardware Installation

Drive Installation

General information on installing 3.5-inch and 2.5-inch drives, including SSDs, into the JBOD enclosure.

Installing 3.5-inch Drives

Step-by-step guide for installing 3.5-inch hard drives into the enclosure's drive trays.

Installing 2.5-inch Drives

Step-by-step guide for installing 2.5-inch drives (HDDs or SSDs) into the enclosure's drive trays.

Installing Solid-State Drives

Detailed instructions for installing SSDs into the 3.5-inch drive trays of the JBOD enclosure.

Installing Handles

Connecting to NAS

Guide on how to connect the JBOD enclosure to a QNAP NAS using SFF-8088 cables.

Connecting to Server

Instructions for connecting the JBOD enclosure to a Windows or Linux server via SFF-8088 cables.

Hot-Swapping PSU

Procedure for replacing a power supply unit (PSU) on the TL-R1200S-RP without powering off the system.

Basic Operations

LED Indicators

Explains the status indicators (LEDs) on the JBOD enclosure and their meanings for system status and drive access.

Audio Alert

Fan Speed Switch

Troubleshooting

Forcing JBOD Recognition

Steps to troubleshoot issues where the NAS or JBOD Manager cannot detect the JBOD enclosure.

Hot-swapping Failed Drives

Procedure for replacing a failed drive while the JBOD enclosure is operational, supported by specific RAID types.

Related product manuals