QNAP TS-1283XU-RP Repair Manual

b. Attach the screws.
Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
8. Attach the LED circuit boards to the front panel.
a. Align the holes in the LED circuit boards to the screw holes on the front panel.
b. Attach the screws.
| NAS Repair Manual
Category D NAS Models 122

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English