QNAP TS-1283XU-RP Repair Manual

Note
• The pan head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
9. Attach the front panel to the chassis.
a. Insert the hooks at the bottom of the front panel to the holes on the chassis.
b. Attach the top of the front panel to the chassis.
c. Ensure the latches on the front panel are secured to the chassis.
| NAS Repair Manual
Category D NAS Models 123

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English