QNAP TS-1283XU-RP Repair Manual

10. Attach the power supply unit.
a. Attach the power supply unit bracket to the power supply unit.
b. Insert the power supply unit with the bracket.
c. Align the holes in the bracket with the holes on the chassis.
d. Attach the screws.
Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category D NAS Models 125

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English