QNAP TS-1283XU-RP Repair Manual

Note
• The at head M3x4 screw requires a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
d. Attach the fan cables to the system board.
17. Attach expansion cards.
a. Insert an expansion card into the slot on the system board.
| NAS Repair Manual
Category D NAS Models 132

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English