QNAP TS-1283XU-RP Repair Manual

13. Remove the system fan.
a. Disconnect the fan cable from the system board.
b. Remove the screws that secure the fan to the tray.
Note
• The at head self-tapping M5x10 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category A NAS Models 21

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English