QNAP TS-1283XU-RP Repair Manual

Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
7. Attach the backplane to the chassis.
a. Slide the backplane in.
b. Insert the connector on the backplane into the slot on the system board.
| NAS Repair Manual
Category C NAS Models 84

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English