QNAP TS-1283XU-RP Repair Manual

c. Attach the screws from the inside of the front panel.
Warning
Do not touch the components on the circuit board or allow the components to come
into direct contact with metallic objects. Doing so may cause damage.
Note
The at head M3x5 screws require a Phillips #2 screwdriver.
8. Attach the fans to the rear panel.
a. Align the holes in the fans with the screw holes on the rear panel.
b. Attach the screws.
| NAS Repair Manual
Category C NAS Models 85

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English