QNAP TS-1283XU-RP Repair Manual

5. Remove all drive trays.
Important
Remember the number of each drive. Each drive will need to be returned to their original
bay.
6. Remove the case cover.
a. Remove the screws on the rear panel.
Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
b. Slide the cover back.
| NAS Repair Manual
Category D NAS Models 98

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English