28
ii. Remove the screw connecting the fan module to the chassis.
iii. Press down the clip and remove fan module.
7. Install M.2 SSD.
i. Attach riser screw based on the M.2 SSD size
ii. Insert M.2 SSD into M.2 socket.
iii. Attach screw to riser to hold M.2 SSD in place.
8. Attach the fan module.
i. Insert fan module into chassis.
ii. Attach screw to fan module.
iii. Connect fan cable.
9. Close the case cover and fasten the screws.
10. Connect the power adaptor and cables to the NAS.
To Next Page
Loading...
Need help?
General
