29
Chapter 6. Install and Hot-swap Drives
The TS-1685 is compatible with 2.5-inch/3.5-inch SATA drives. For drive compatibility list,
go to
http://www.qnap.com/compatibility.
Caution:
QNAP is not responsible for product damage/malfunction or data loss due to misuse or
improper installation of hard disks.
Note when a drive is installed in a QNAP NAS for the first time, the drive will be
automatically formatted and all the data on disk will be cleared.
For information on QTS NAS migration, go to docs.qnap.com and check “Migrating from
Old NAS” section.
6.1 Drive Bay Numbering
Identify the drive position in the diagram below.
6.2 Installing Drives
To install drives, follow the steps below:
To Next Page
Loading...
Need help?
General
