17
Off
All the drives on the NAS are in standby
mode.
LAN
Orange
The disk data is being accessed from the
network and a read/write error occurs
during the process.
Flashes orange The NAS is connected to the network.
HDD/SSD/M.2
SSD
Flashes red
The NAS is being accessed from the
network.
Red A drive read/write error occurs.
Flashes green The disk data is being accessed.
Green The drive can be accessed.
USB
Flashes blue every
0.5 sec
1. A USB device (connected to the front USB
port) is being detected.
2. A USB device (connected to the front USB
port) is being removed from the NAS.
3. The USB device (connected to the front
USB port of the NAS) is being accessed.
The data is being copied to or from the
external USB device.
Blue
A front USB device is detected (after the
device is mounted).
Off
The NAS has finished copying the data to or
from the USB device connected to the front
USB port.
To Next Page
Loading...
Need help?
General
