38
Network Settings – Static IP*
Network Settings – BACK
Back to Main Menu
* In Network Settings – Static IP, users can configure the IP address, subnet mask,
gateway, and DNS of LAN 1 and LAN 2.
2. Physical disk
In Physical disk, you can see the following options:
Disk Info
Back to Main Menu
Disk info shows the temperature and the capacity of the drive.
°
3. Volume
This section shows the capacities of volumes and LUNs. You can view the name and
capacity of a volume/LUN. If there are multiple volumes/LUNs, press "Select" to view
the information of a specific volume/LUN.
4. System
This section shows the system temperature and the rotation speed of the system fan.
°
°
5. Shut down
You can use this option to turn off the NAS. Press "SELECT", select "Yes", and then
press "ENTER" to confirm.
6. Reboot