QNAP TS-1886XU-RP User Manual

Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
12. Click Next.
13. Select Obtain an IP address automatically (DHCP).
14. Click Next.
15. Select the types of devices that you will use to access shared folders on the NAS.
16. Click Next.
17. Review the settings.
18. Click Apply.
A confirmation message appears.
Warning
Clicking Confirm deletes all data on the drive before installing QTS.
19. Click Confirm.
QTS is installed.
TS-1886XU-RP User Guide
Installation and Configuration 36

QNAP TS-1886XU-RP Specifications

General

Brand	QNAP
Model	TS-1886XU-RP
Category	Storage
Language	English