EasyManuals Logo

QNAP TS-1886XU-RP User Manual

QNAP TS-1886XU-RP
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Component TS-1886XU-RP-D1602-4G TS-1886XU-RP-D1622-8G
System battery CR2032 lithium battery (3V, 225 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local
regulations or the instructions of the battery
manufacturer.
Sound level 56.9 db(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.
Fans System: 3 x 60 mm, 12V DC fans
Warning
To avoid potential injury or damage to components, do
not touch the fans while the NAS is connected to a
power source.
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity Non-condensing relative humidity: 5% to 95%
Wet-bulb temperature: 27˚C (80.6˚F)
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Package Contents
Item Quantity
TS-1886XU-RP 1
Power cord 2
Ethernet cables 2
Screws for 3.5-inch drives 48
Screws for 2.5-inch drives 64
Quick Installation Guide (QIG) 1
Components
TS-1886XU-RP User Guide
Product Overview 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-1886XU-RP and is the answer not in the manual?

QNAP TS-1886XU-RP Specifications

General IconGeneral
BrandQNAP
ModelTS-1886XU-RP
CategoryStorage
LanguageEnglish

Related product manuals