5. Connect the power cord to the PSU and the electrical outlet.
6. Power on the NAS.
7. Enable alerts for PSU failures.
a. Log on to QTS as administrator.
b. Go to Control Panel > System > Hardware > General .
c. Select Enable Redundant Power Supply Mode.
d. Click Apply All.
Rail Kits
The TS-1886XU-RP is compatible with the rack model RAIL-B02.
Rail kits are not included with the JBOD enclosure and must be purchased separately. For details, contact an
authorized reseller or go to http://shop.qnap.com.
You can find installation information in the rail kit package.
Expansion Unit Installation
The TS-1886XU-RP is compatible with both SAS expansion units and USB expansion units. For details,
please see table below.
You can purchase storage expansion accessories from QNAP or an authorized reseller.
For details, go to https://shop.qnap.com/.
TS-1886XU-RP User Guide
Installation and Configuration 28
To Next Page
Loading...
