QNAP TS-1886XU-RP User Manual

1. Preface
About This Guide
This guide provides information on the QNAP TS-1886XU-RP NAS and step-by-step instructions on
installing the hardware. It also provides instructions on basic operations and troubleshooting information.
Audience
This document is intended for storage administrators. This guide assumes that the user is knowledgeable
and qualified to install, maintain, and troubleshoot issues involving servers, server components, and storage
systems. This guide also assumes that the user is trained to recognize hazards, including the appropriate
actions the user needs to take to prevent personal injury and damage to data and property.
Document Conventions
Symbol Description
Notes provide default configuration settings and other supplementary
information.
Important notes provide information on required configuration settings and other
critical information.
Tips provide recommendations or alternative methods of performing tasks or
configuring settings.
Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.
TS-1886XU-RP User Guide
Preface 3

QNAP TS-1886XU-RP Specifications

General

Model	TS-1886XU-RP
Category	Storage
Total Drive Bays	18
CPU	Intel Xeon D-1521
CPU Architecture	64-bit
10GbE Ports	2
SSD Cache Acceleration Support	Yes
Operating System	QTS
Form Factor	Rackmount
Drive Bay Compatibility	2.5-inch SSD / 3.5-inch HDD
System Memory	8GB DDR4 ECC
Memory Slot	4
Gigabit Ethernet Ports	4
PCIe Slots	2
M.2 SSD Slot	2
Power Supply	500W (x2), 100-240V AC, 50/60Hz, redundant