QNAP TS 33 Series - QTS Installation

TS-233
2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QTS as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
QTS Installation
Method Description Requirements
Qnder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qnder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
Note
For details see, Installing QTS
Using Qnder Pro
• Computer
• Network cable
• Qnder Pro installer
TS-x33 User Guide
Installation and Conguration 33