QNAP TS-431X2 User Manual

Tip
The case cover screws are longer than the other screws that will be removed.
b. Place the NAS on its left side.
c. Slide the case cover to the right so that the triangle aligns with the unlock icon.
d. Pull the case cover up until it completely detaches from the chassis.
6. Remove the top and bottom screws on the back of the NAS.
TS-431X2 User Guide
Installation and Configuration 15

QNAP TS-431X2 Specifications

General

Brand	QNAP
Model	TS-431X2
Category	Network Hardware
Language	English