EasyManuals Logo

QNAP TS-453mini User Manual

QNAP TS-453mini
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
119
4. Plug in a new power supply to the NAS.
5. Turn on the NAS.
Enable warning alert for redundant power supply on the web-based interface:
If two power supply units (PSU) have been installed on the NAS and connected to the power
sockets, both PSU will supply the power to the NAS (applied to 1U and 2U models). Users
can enable redundant power supply mode in “System Administration” > “Hardware” to
receive warning alert for the redundant power supply. The NAS will beep and record the
error messages in “System Logs” when the PSU is plugged out or fails.
If only one PSU is installed on the NAS, users are suggested NOT to enable this option.

Table of Contents

Other manuals for QNAP TS-453mini

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-453mini and is the answer not in the manual?

QNAP TS-453mini Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
RAID supportYes
Storage drive size2.5/3.5 \
Storage drive capacity0 GB
Storage drive interfaceSerial ATA III
Storage drives installedNo
Installed storage drive type-
Supported storage drive typesHDD & SSD
Total installed storage capacity0 TB
Maximum supported storage capacity- TB
Number of storage drives installed0
Number of storage drives supported4
Processor familyIntel® Celeron®
Processor frequency2 GHz
Flash memory512 MB
Memory slots2
Internal memory2 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Ethernet LAN data rates10, 100, 1000 Mbit/s
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
Cooling typeActive
Product colorBlack
Number of fans1 fan(s)
TypeNAS
Operating system version4.1.2
Operating system installedQNAP Turbo System
AC input voltage100-240 V
Power supply locationBuilt-in
Power consumption (sleep)1.04 W
Power consumption (typical)30.23 W
Power supply unit (PSU) capacity90 W
Operating temperature (T-T)0 - 35 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedAC, LAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width151 mm
Height210 mm
Weight2000 g
Package weight3400 g

Related product manuals