EasyManuals Logo

QNAP TS-453mini User Manual

QNAP TS-453mini
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
48
5.3 TS-451S, TS-531P, TS-531X, TS-651, TS-831X, TS-851, TS-x53/x53S Pro,
TS-563, TVS-882S, TVS-882ST, TVS-x63, TS-x53Aseries (2/4/6/8-bay)
1. Loosen the three screws on the rear of the NAS.
2. Remove the case cover of the NAS gently.
3. Locate the memory slot. Make sure the slot is empty.
Note: For TS-x53/x53S Pro, TS-451S, TS-531P, TS-651, TS-851 and TS-x53A
models, always ensure that a memory module is installed in the Primary slot
(red). If not, then the system will fail to start. The maximum supported memory is
8GB combined.
4. Grasp the edge of the memory module. Align the notch on the gold edge of the module

Table of Contents

Other manuals for QNAP TS-453mini

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-453mini and is the answer not in the manual?

QNAP TS-453mini Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
RAID supportYes
Storage drive size2.5/3.5 \
Storage drive capacity0 GB
Storage drive interfaceSerial ATA III
Storage drives installedNo
Installed storage drive type-
Supported storage drive typesHDD & SSD
Total installed storage capacity0 TB
Maximum supported storage capacity- TB
Number of storage drives installed0
Number of storage drives supported4
Processor familyIntel® Celeron®
Processor frequency2 GHz
Flash memory512 MB
Memory slots2
Internal memory2 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Ethernet LAN data rates10, 100, 1000 Mbit/s
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
Cooling typeActive
Product colorBlack
Number of fans1 fan(s)
TypeNAS
Operating system version4.1.2
Operating system installedQNAP Turbo System
AC input voltage100-240 V
Power supply locationBuilt-in
Power consumption (sleep)1.04 W
Power consumption (typical)30.23 W
Power supply unit (PSU) capacity90 W
Operating temperature (T-T)0 - 35 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedAC, LAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width151 mm
Height210 mm
Weight2000 g
Package weight3400 g

Related product manuals