LED Status Description
LAN Orange The network connection is operating.
Flashes orange The device is being accessed from the network.
O The device is not connected to a network.
2.5 Gigabit
Ethernet
speed
Green The network connection is operating at 2.5 Gbps.
Orange • The network connection is operating at 1 Gbps.
• The network connection is operating at 100 Mbps.
O The network connection is operating at 10 Mbps.
2.5 Gigabit
Ethernet
activity
Orange A network connection has been established.
Flashes orange The device is being accessed from the network.
O There is no network connection.
Drive Flashes red The data is being accessed and a read/write error occurs
during the process.
Red • A drive read/write error occurred.
Flashes green • Data is being accessed.
Green The drive is ready.
O No drive was detected.
Expansion Blue A QNAP USB or SATA external storage device is connected.
O No expansion unit has been detected.
Audio Alert
Duration Frequency Description
Short beep (0.5 seconds) 1 • The NAS is starting up.
• When the reset button is pressed for 3 seconds,
the NAS resets congurations.
• When the reset button is pressed for 10 seconds,
the NAS resets congurations and reboots.
• The operating system was updated.
3 • Cannot detect installed disk.
• The rmware was updated.
TS-x64U User Guide
Basic Operations 47
To Next Page
Loading...
Need help?
General
