QNAP TS-464U-RP User Manual

2. Product Overview
This chapter provides basic information about the QNAP TS-x64U NAS.
About the TS-x64U
The TS-x64U is powered by an Intel® Celeron® N5105/N5095 quad-core 2.9 GHz processor. The NAS
supports connecting expansion units through two native USB 3.2 Gen 2 Type-A ports, and USB JBOD
enclosures through USB ports on PCIe cards. Additionally, the TS-x64U supports SATA 6 Gbps drives
(backward compatible with SATA 3 Gbps), and is equipped with two 2.5 Gigabit Ethernet ports and one
PCIe Gen 3 x2 slot for various applications and expansion options.
Hardware Specications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third
party invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specications are subject to change without prior notice. To see the latest
specications, go to https://www.qnap.com.
Ordering P/N Drive bays Memory Power supply
TS-464U-4G 4 4 GB Single
TS-464U-RP-4G 4 4 GB Redundant
TS-1264U-RP-4G 4 4 GB Redundant
Component TS-464U-4G TS-464U-RP-4G TS-1264U-RP-4G
Processor
CPU Intel® Celeron® N5105/N5095
Frequency 4-core/4-thread 2.9 GHz burst
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory 4 GB RAM: 1 x 4 DDR4 SODIMM
TS-x64U User Guide
Product Overview 4

QNAP TS-464U-RP Specifications

General

Brand	QNAP
Model	TS-464U-RP
Category	Storage
Language	English