QNAP TS-53E Series Repair Manual

b. Pull the handles o the chassis.
Note
• The at head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
5. Remove all drive trays.
Important
Remember the number of each drive. Each drive will need to be returned to their original
bay.
| NAS Repair Manual
Category E NAS Models 141

QNAP TS-53E Series Specifications

General

Brand	QNAP
Model	TS-53E Series
Category	Server
Language	English