7. Category E NAS Models
This chapter uses the TS-h1677AXU-RP as the representative NAS model for category E. The
disassembly and reassembly instructions, and the list of components and screws, are based on the
representative model.
For details on category E NAS models, see NAS model categorization.
Note
While all NAS models in the same category share the same general structural design,
dierent models may have certain dierences in their parts and components in terms
of size, quantity, and other specications. For non-representative models in this category,
please use the following topics as a point of reference.
Disassembling the TS-h1677AXU-RP
Before you start, make sure you read the Repair requirements.
Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
• To avoid potential injury or damage to components, ensure that the drives and other
internal system components have cooled before touching them.
1. Power o the NAS.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Optional: Remove handles.
a. Remove the screws that secure the handles to the chassis.
| NAS Repair Manual
Category E NAS Models 140
To Next Page
Loading...
Need help?
General
