QNAP TS-53E Series Repair Manual

Note
• The at head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
b. Slide the system board backward.
c. Lift the system board o the chassis.
18. Remove the backplane tray.
a. Remove the screws that secure the backplane tray to the bottom of the chassis.
| NAS Repair Manual
Category E NAS Models 152

QNAP TS-53E Series Specifications

General

Brand	QNAP
Model	TS-53E Series
Category	Server
Language	English