QNAP TS-53E Series Repair Manual

b. Remove the screws that secure the HDMI ports on the system board to the rear panel of
the tray.
Note
• The pan head self-tapping M2x4 screws require a Phillips #1 screwdriver.
• A torque of 2 kgf.cm (1.74 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
c. Remove the mylar.
| NAS Repair Manual
Category B NAS Models 47

QNAP TS-53E Series Specifications

General

Brand	QNAP
Model	TS-53E Series
Category	Server
Language	English