QNAP TS-53E Series Repair Manual

b. Attach the mylar.
c. Align the mounting holes on the system board to the screw holes on the tray.
d. Attach the screws that secure the HDMI ports on the system board to the rear panel of the
tray.
Note
• The pan head self-tapping M2x4 screws require a Phillips #1 screwdriver.
• A torque of 2 kgf.cm (1.74 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category B NAS Models 50

QNAP TS-53E Series Specifications

General

Brand	QNAP
Model	TS-53E Series
Category	Server
Language	English