QNAP TS-53E Series Repair Manual

b. Attach the screw that secures the PCIe bracket to the rear panel.
Note
The at head M3x5 screw requires a Phillips #2 screwdriver.
15. Attach the case cover.
a. Place the cover on the device.
b. Slide the cover forward.
c. Attach the screws connecting the top cover to the chassis.
Note
The at head M3x4 screws require a Phillips #2 screwdriver.
| NAS Repair Manual
Category C NAS Models 91

QNAP TS-53E Series Specifications

General

Brand	QNAP
Model	TS-53E Series
Category	Server
Language	English