Category Item
Tools • Phillips #1 or #2 screwdriver
• Flat head screwdriver
• Anti-static wrist strap
Setting Up the NAS
Note
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install drives.
For details, see the following topics:
• Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing M.2 Solid-State Drives on the Top Panel
3. Optional: Connect expansion units.
For details, see Connecting USB Expansion Units.
4. Connect the power cord and all applicable cables.
5. Power on the NAS.
6. Install QTS.
For details, see QTS Installation.
7. Log on to QTS.
TS-x53E User Guide
Product Overview 12
To Next Page
Loading...
