c. Attach the heatsink to the M.2 SSD.
Tip
On single-sided M.2 modules, components are usually mounted on the top side. On double-
sided M.2 modules, components are mounted on both sides. To identify the top side, insert the
module into the dedicated slot on the NAS.
d. Place the merged M.2 SSD and heatsink on the tray.
Tip
The cooling module package includes a spacer. You can install that spacer between the M.2
SSD and the tray.
TS-x77 User Guide
Installation and Configuration 24
To Next Page
Loading...
