2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-832PX
The TS-832PX is powered by a quad-core 1.7 GHz processor that provides small businesses with cost-
effective storage for a wide range of applications. The NAS includes dual 10 Gigabit Ethernet SFP+ and 2.5
Gigabit Ethernet RJ45 ports to support high-speed networking, empower bandwidth-demanding applications,
and facilitate file sharing. To boost storage performance, the TS-832PX supports various PCIe cards to
provide M.2 SATA/NVMe SSD caching.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N CPU Memory Power supply
TS-832PX-4G Annapurna Labs Alpine
AL324
4 GB Single
Component TS-832PX
Processor
CPU Annapurna Labs AL324
Frequency 4-core 1.7 GHz
Architecture ARM 64-bit
Encryption engine Supported
Memory
Pre-installed memory 4 GB RAM: 1 x 4 GB DDR4 SODIMM
TS-832PX User Guide
Product Overview 4
To Next Page
Loading...
