QNAP TS-853U-RP User Manual

84
ii. Place hard drive onto tray so that the side holes of the tray are aligned with the side
holes of the harddrive.
iii. Reinsert fastening panels to lock drive to tray.
b. 2.5” HDD/SSD:
i. Remove the fastening panels from the sides of the drive tray.
ii. Place hard drive onto tray so that the bottom holes of the tray are aligned with the
bottom holes of the harddrive.
iii. Reinsert fastening panels to lock drive to tray.

QNAP TS-853U-RP Specifications

General

Brand	QNAP
Model	TS-853U-RP
Category	Network Storage Server
Language	English