QNAP TS-853U-RP User Manual

94
2. Put the hard drive in the hard drive cradle and slide it forwards to lock it into the SATA
connector. Clip in both brackets, slide the bracket into the hole in point 2 before pressing
the bracket towards the HDD (for the TAS-268, repeat the same step for the second
drive.)
3. Align point a on the case cover with point b on the front of the NAS (see figure below).
Push forward the case cover (step 2) and fasten the toolless screw to secure the case
cover.

QNAP TS-853U-RP Specifications

General

Brand	QNAP
Model	TS-853U-RP
Category	Network Storage Server
Language	English