QNAP TS-879U-RP User Manual

45
2. To remove installed memory modules, pull the retention clips on each side so that the
module tilts up for easy removal.
Note: Always ensure that a memory module is installed in the Primary (red) slot.
If not, then the system will fail to start. The maximum supported memory is 8GB
combined.
3. Slide the memory module to the slot at a 45-degree angle (approximately) and press
the memory module down until it clips into place. Ensure the memory module sits

QNAP TS-879U-RP Specifications

General

Brand	QNAP
Model	TS-879U-RP
Category	Network Storage Server
Language	English