QNAP TS-879U-RP User Manual

89
ii. Push the button below the blue switch to release the lever.
iii. Pull out tray using lever.
2. Install HDD/SDD onto tray.
a. 3.5” HDD:
i. Remove the fastening panels from the sides of the drive tray.
ii. Place hard drive onto tray so that the bottom holes of the tray are aligned with
the bottom holes of the harddrive.
iii. Reinsert fastening panels to lock drive to tray.

QNAP TS-879U-RP Specifications

General

Brand	QNAP
Model	TS-879U-RP
Category	Network Storage Server
Language	English