QNAP TS-i410X User Manual

5. NAS Migration
You can migrate data and settings from your current NAS to another NAS model with minimal disruptions
by installing all the hard drives from the source NAS to the destination NAS. RAID conguration and other
settings are retained on the destination NAS after migration.
NAS Migration Requirements
You can only migrate drives to specic NAS models, depending on your source NAS. For the list of NAS
models compatible with direct NAS migration, see https://www.qnap.com/go/nas-migration.
Your device must meet the following requirements:
• QTS NAS supports several types of NAS migration:
• ARM NAS to an ARM NAS
• x86 NAS to an x86 NAS
• ARM NAS to an x86 NAS
Note
You cannot migrate from an x86 NAS to an ARM NAS.
• The destination NAS must run on the same QTS version as the source NAS (or later).
• The destination NAS must have sucient free drive bays to accommodate all the drives that you are
migrating from the source NAS.
For NAS models that do not support NAS migration, you can migrate existing data using HBS 3. For details,
see Migrating NAS Data Using HBS 3.
Status and Setting Changes after NAS Migration
The status of NAS data and settings varies after migration.
Data and Settings After NAS Migration
Registered myQNAPcloud name Your registered myQNAPcloud name is not migrated.
Encrypted disk volumes If the NAS does not support le system encryption,
encrypted disk volumes are not migrated.
Warning
To prevent data loss, back up and save the
encryption keys of encrypted disk volumes in
a safe place. You can also choose to decrypt
disk volumes before migration.
TS-i410X User Guide
NAS Migration 25

QNAP TS-i410X Specifications

General

RAID levels	0, 1, 5, 6, 10, JBOD
RAID support	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, exFAT, ext3, ext4
Storage drive interface	-
Storage drives installed	No
Storage drive sizes supported	2.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA III
Operating system version	5.0.1
Operating system installed	QNAP QTS
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Ethernet LAN data rates	1000, 2500, 5000, 10000 Mbit/s
Copper ethernet cabling technology	10BASE-T
Storage temperature (T-T)	-45 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Type	NAS
Device class	Small & Medium Business
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox
Output voltage	9 - 36 V
AC input voltage	100 - 240 V
Power supply location	External
Power consumption (sleep)	17.628 W
Power consumption (typical)	25.592 W
Power supply unit (PSU) capacity	90 W
Chassis type	Tower
Cooling type	Passive
Product color	Black
LED indicators	LAN, Power, SSD, Status
Cable lock slot type	Kensington
HDMI version	1.4b
Ethernet LAN (RJ-45) ports	2
Processor model	x6425E
Processor family	Intel Atom®
Processor frequency	3 GHz
Processor manufacturer	Intel
Flash memory	4096 MB
Internal memory	8 GB
Cables included	AC, LAN (RJ-45)
Number of screws	16

Weight and Dimensions

Depth	254 mm
Width	180 mm
Height	65 mm
Weight	2540 g
Package weight	3730 g