EasyManua.ls Logo

QNAP TS-i410X - LEDs

QNAP TS-i410X
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LED Status Description
LAN Orange The network connection is operating.
Flashes orange The device is being accessed from the network.
O The device is not connected to a network.
10 Gigabit
Ethernet
(RJ45) speed
Green A 10 GbE network connection has been established.
Orange The network connection is operating at below 10 Gbps.
O There is no network connection.
10 Gigabit
Ethernet
(RJ45) activity
Orange A network connection is established.
Flashes orange Data is being transmitted.
O There is no network connection.
Drive Flashes red The data is being accessed and a read/write error occurs
during the process.
Red A drive read/write error occurred.
Flashes green Data is being accessed.
Green The drive is ready.
O No drive was detected.
Audio Alert
Duration Frequency Description
Short beep (0.5 seconds) 1 The NAS is starting up.
When the reset button is pressed for 3 seconds,
the NAS resets congurations.
When the reset button is pressed for 10 seconds,
the NAS resets congurations and reboots.
The operating system was updated.
3 Cannot detect installed disk.
The rmware was updated.
TS-i410X User Guide
Basic Operations 23

Related product manuals